Product

AVL SESAM i60 FT SII

A high-end, multi-component exhaust gas measurement system

The AVL SESAM i60 FT SII is a Fourier-Transform Infra-Red (FTIR) exhaust gas measurement system that offers the highest measurement performance thanks to long-term factory calibration and evaluation methods that have been optimized for different fuels and applications.

sesam i60

The individual and traceable factory calibration of the SESAM i60 FT SII provides the highest accuracy and transparency for compliance with international standards. The system measures more than 20 gas components simultaneously, including nitrous oxide for EPA CFR 1065/1066, China 6 and ammonia for Euro IV - VI. It can measure all exhaust gas components that are now being discussed as additional pollutants for upcoming regulations such as Euro 7 / VII, and even has the flexibility to update pollutants required later, e.g. for e-fuels and future applications.

In the ongoing quest for reduced-emission powertrains, exhaust gas aftertreatment systems are becoming increasingly complex. The introduction of dual stage SCR catalyst systems and the increased use of alternative fuels has heightened this complexity. In order to manage and reduce pollutants and emissions, a clear understanding is required of aftertreatment systems and the exhaust gas components involved. With the AVL SESAM i60 FT SII, we have created a tool that supports the user in gaining that knowledge for the following applications:

SESAM i60 FT SII

R&D and certification of modern heavy-duty engines with SCR technologies (Euro IV, V and VI), especially for the measurement of ammonia (NH3

R&D and certification of all modern light-duty diesel engines with exhaust after treatment systems, e.g. for the measurement of N2

General purpose exhaust emission measurement on engine and chassis dynamometer test cells 

R&D of modern exhaust after treatment systems such as those featuring (Diesel Oxidation Catalyst (DOC), Selective Catalyst Reduction (SCR), Lean NOX Trap (LNT) .

Development and application of alternative fuels (H2, NH3, CNG, ethanol, methanol, bio-diesel, etc.) 

R&D of various other applications such as fuel cells and hybrid drives

Easy to Use, Easy to Integrate

Thanks to the iGEM SESAM touchscreen control software, operation is easy and intuitive. Bench status, including all streams and analyzers can be viewed at a glance. The system provides legislation compliant support for Euro VI and EPA 40 CFR part 1065, including automated compliancy checks. Diagnostic functions can be performed automatically, which supports troubleshooting down to the sensor and valve level. The SESAM i60 FT SII is incredibly flexible making integration into your existing testbed automation system fast and painless thus adding to the value of this dynamic, high-end measurement system.

Property Unit

Voltage supply

230 / 200 / 120 / 100 VAC
Weight 180 kg (standard cabinet)
Ambient temperature 10 – 30 °C / 10 -40 °C (AC)
Relative humidity 5 – 80 %, non-condensing
Pressure 900 – 4000 hPa (13 – 58 psi)

Measured gas components

CO, CO2, H2O, NO, NO2, N2O, NH3, CH4, C2H2, C2H4, C2H6, C3H6, C3H8, C4H6, C2H5OH, CH3OH, CH3CHO, CHO, HCOOH, SO2, IC5, NC5, NC8, HNCO, HCN, COS, AHC, NOx, NMHC, HCD, HCG, HCE
Small Cabinet 600 x 1345 x 1060 mm (w x h x d)
Large Cabinet 670 x 1970 x 1240 mm (w x h x d)

 

SESAM i60 FT SII

The SESAM i60 FT SII offers the dynamic, accurate and synchronous measurement of NO, NO2, N2O, NH3, CO, CO2, CH4 as well as alcohols, aldehydes and more within one device.

Fast Response Times

Very fast and accurate FTIR with 35 % faster response times at lower sample flow rates and online real-time measurement for data plausibility

Reduced Maintenance

Minimal number of mechanical moving parts guarantees highest testbed uptime and key components such as the laser and detector boast lifetimes in excess of four years

Highest Reliability on the Market 

3 years warranty on the FTIR i60 and decades of AVL’s FTIR application experience gives you investment security

Easy to Use

Easy operation and flexible integration into the testbed automation system

Low Operating Costs

A low maintenance system means there is no need for regular calibration

Verified Accuracy

Every single FTIR comes with an individual gas calibration certificate

SESAM i60 FT SII Small

The small SESAM i60 FT SII cabinet includes the FTIR i60 spectrometer, optionally an FID analyzer for THC measurements, and a PMD analyzer for O2 measurements.

SESAM i60 FT SII Large / Dual

The large cabinet may contain an additional PMD analyzer for O2 measurements and/or an IRD analyzer for CO2 EGR measurements. Alternatively, the large cabinet can be equipped with two FTIR i60 spectrometers for dual stream applications providing simultaneous pre- and post-exhaust aftertreatment measurements. 

SESAM i60 FT C

This is a streamlined version of the SESAM i60 FT SII for the measurement of the most important exhaust gas components when applying SCR exhaust after-treatment systems.

SESAM i60 FT D1

Is optimized for dilute measurements of nitrous oxides, ammonia, formaldehyde, acetaldehyde, ethanol and methanol according to e.g. ECE GTR-15 and future regulations (as EURO 7 / VII or China 7 / VII). 

AVL H2D
AVL H2D™

The AVL H2D is a high-end hydrogen mass spectrometer to support the development of fuel cells and H2 internal combustion engines (ICE). It measures H2 and optionally N2, O2, H2O and CO2.

AVL SlimLine™ Dilution Systems
AVL SlimLine™ Dilution Systems

The new benchmark for full-flow diluted emission testing is designed to take up much less space than conventional system cabinets and is built to use less energy.

SL Visual
AVL AMA SL™

The AVL AMA SL is a exhaust measurement system that is revolutionizing emission testing. It is ideally suited to both research and development applications and certification for all types of engines and fuels.

i60
AVL iGeneration SII Systems

The AVL iGENERATION Series II clears the way for intelligent and intuitive R&D and certification emission testing according to the latest worldwide emission regulations.

iCAL SL
AVL iCAL Emission Calibration Devices

The AVL iCAL product line includes everything you need to accurately calibrate emission measurement devices according to the legal obligations of global markets.

Filter Weighing Robot
AVL Filter Weighing Management

Learn more about our Filter Weighing portfolio existing of Filter Weighing Chamber, Filter Weighing Robot and the tailored software tool AVL ParticleScale.

AVL SHED™
AVL SHED™

The AVL VT/VV-SHED (Sealed Housing for Evaporative Determination) systems constitute a state-of-the-art test system for testing evaporative emissions.

AVL CANLOAD™
AVL CANLOAD™

AVL CANLOAD is designed for the automated execution of conditioning and aging cycles of canisters containing activated carbon from the automotive sector.

AVL FUELLOAD™
AVL FUELLOAD™

AVL FUELLOAD is designed specifically for fuel conditioning and refueling procedures of vehicles or tank systems in the context of ORVR test procedures.

iGEM 2 Test Automation Solution
AVL iGEM 2™ Test Automation

AVL iGEM 2™ is our cutting-edge test automation solution for your energy and emission testing needs. It delivers high-quality data for certification and R&D testing.

Lab Management for Vehicle Process Overview
AVL Lab Management™ for Vehicle

Achieve process safety and higher efficiency with our modular and scalable Lab Management for Vehicle solution.

Customer Services
Customer Services for Testing Solutions

The AVL Customer Services organization consists of more than 700 service- and application engineers worldwide, operating from more than 50 locations. Our global footprint is your local benefit.

Insights EU7 Standards
Insights and Interpretation Into the Latest EU7 Standards
On-demand

WEBINAR - The upcoming European vehicle emission standards Euro 7 publication by the European Commission will outline testing and certification updates which will need to be addressed when developing future propulsion solutions.

H2 Testing
Hydrogen ICE Testing - Challenges and Solutions
On-demand

WEBINAR - Hydrogen has the potential to be used to facilitate the shift towards zero CO2 and zero impact pollutant emissions in transport, marine, and industrial internal combustion engine (ICE) applications.

Emission NFZ Key Visual final 22.11.2019
AVL Digital Tech Day: EURO 7 Regulations and Beyond
On-demand

In the coming years and decades, vehicle manufacturers and suppliers will have to face various global challenges. Reducing global warming, avoiding further greenhouse gas emission and improving local air quality will have a direct impact on relevant

GL_ITS_Images_Key Visual Emission_square
A Guide to Vehicle Emissions and Energy Testing
On-demand

In this webinar, Kurt Engeljehringer shares details of AVL’s free Emission and Energy Testing Handbook, which aims to help engineers understand and navigate this complex topic.

Image_OpeningCeremony
AVL Opens New Hydrogen and Fuel Cell Test Center in Graz
Greater test capacities for innovative energy and propulsion solutions