By using modern signal conditioning and the real-time EtherCAT interface, the FEM 4 meets the demands of modern development processes. The new circuit concept enables you to control and measure signals such as currents, temperatures, frequencies and voltages directly up to 2,400 VDC without influencing the measurement signal. The measuring modules in a FEM 4 can be quickly adapted to new tasks, helping you to increase flexibility and ultimately optimize the utilization of your test facilities.
Technical Data | Unit |
Module size (W x H x D) |
45 x 132 x 150 mm |
Power supply | 9 … 35 VDC |
Interfaces | EtherCAT, CAN |
Operating temperature | -40 … +80 °C |
Relative humidity | 20 … 80 %, non-condensing |
Protection class | IP20 |
High Voltage Isolation
These modules offer a high degree of insulation of the individual connector (single channel or group of channels) for use at high voltage potentials, e.g. in electrification.
Voltage Measurement Modules
The voltage modules enable measurements at low and high voltage (HV) levels with up to 8 selectable measurement ranges depending on the module type.
Current Measurement Modules
The current measurement modules enable measurements up to ±24 mA, or up to 2,000 A with an additional ballast.
Temperature Modules
The following modules are suitable for temperature measurements. Depending on the type, the channels are individually isolated or combined into groups.
Universal Modules
In order to cover the widest possible range of applications, the following universal modules are available.
Active Modules
In addition to passive measuring modules, the FEM 4 product family also offers active control modules for signal generation.
Basis and Extension Modules
Further basic and extension modules are offered to complete the portfolio.